Commercial & Hospitality Fit-Out · Hotels
Hotel fit-out delivered around your guests
Guest rooms and suites, lobbies, restaurants and back-of-house areas — renovated floor by floor while the hotel keeps trading, with joinery, aluminium and glass from KRM’s own workshops and the furniture, fixtures and equipment procured and installed by the same team.
The short answer
In short
KRM Global is an Abu Dhabi fit-out contractor for hotels and serviced apartments. It renovates guest rooms, suites, corridors, lobbies, restaurants and back-of-house areas in phased programmes inside operating hotels, with design, civil works, MEP, bespoke joinery, aluminium and glass and FF&E procurement all delivered by its own departments under one contract.
- Typical scope
- Rooms, suites, corridors, lobbies, F&B, spa, back-of-house
- Working method
- Floor-by-floor phasing, noise and dust control, night works
- Made in-house
- Joinery, aluminium, glass and stainless steel
- Furniture
- Custom-made or imported European FF&E
Hospitality interiors
Renovate the rooms. Keep the hotel open.
A hotel renovation is judged twice: by the guest who checks into the finished room, and by the general manager who had to keep selling rooms while it was being built. KRM plans both. Mock-up room first, then floors released in sequence, with a programme the hotel can plan its occupancy around.
Because the headboard walls, wardrobes, vanities, minibar units, doors and glass shower screens come from KRM’s own joinery and aluminium workshops in Mussafah, the lead times and the finish quality stay under our control. Our MEP department handles the fan-coil units, bathroom services, lighting scenes and fire-alarm interfaces so there is one point of responsibility for the room.
The same team furnishes the space: custom-made casegoods from our workshop, or imported European loose furniture and lighting sourced through our procurement department — delivered, installed and snagged by KRM.
- Guest rooms & suites
- Lobbies & lounges
- Restaurants & bars
- Back-of-house & staff areas
Scope of works
What KRM delivers for hotels
Guest rooms and public areas
- Guest-room and suite renovation, including bathrooms and wet areas
- Bed-head and TV joinery walls, wardrobes, vanities and minibar units
- Lobby, reception, lounge and corridor interiors
- Restaurant, café, bar and banquet-hall fit-out
- Spa, gym and pool-deck areas
- FF&E procurement: custom-made or imported European furniture
Engineering and services
- Phasing plan, hoarding and noise and dust control inside a live hotel
- HVAC, fan-coil units and bathroom extract; lighting scenes and controls
- Fire-alarm, emergency lighting and sprinkler interfaces with the hotel systems
- Acoustic partitions and doors between rooms and corridors
- Aluminium windows, balcony doors and frameless shower glass from our workshop
- Snagging, deep cleaning and room-by-room handover
Interactive 3D
Walk through a KRM guest suite
Drag to look around and tap a numbered point to see what each element is and who builds it. Switch on the layers to see the services hidden above the ceiling and the lighting scenes.
Loads the interactive model (about 160 KB).
Illustrative model of a typical renovated guest suite, built from the systems KRM delivers. It is not a drawing of a specific property.
Veneered panels, upholstered headboard, integrated reading lights and switch plates — made as one assembly in KRM’s joinery workshop and fitted in a day per room.
Full-height wardrobe, luggage bench and minibar casework in matching veneer, with safe, lighting and power pre-wired in the workshop.
Aluminium window or balcony door from our own workshop, blackout and sheer curtain tracks concealed in a pelmet, acoustic seals to the corridor and the outside.
Waterproofed and tiled bathroom with a frameless glass shower screen, stone vanity top and concealed cisterns — plumbing and extract by KRM’s MEP department.
Fan-coil unit above the corridor bulkhead, acoustic ceiling, cove lighting and dimmable scenes controlled from the bedside.
Solid-core acoustic and fire-rated door with a hotel lock, flush architraves and corridor finishes installed between occupied rooms.
Armchair, desk, lamps and artwork: imported European pieces or custom-made items, procured, delivered and installed by KRM.
Before and after
From bare shell to finished guest suite
The same room at two moments: the stripped-out shell, and the suite ready for guests, with joinery, lighting, curtains and furniture in place.
In pictures
Hotels & Hospitality by KRM
Project photographs and design visualisations from the KRM studio — the captions say which is which.
Renovated hotel guest suite — design visualisation 
Hotel lobby lounge — design visualisation 
Hospitality guest room fit-out by KRM
Behind every project
A full engineering department, monitoring every week, maintaining after handover
Health, safety and environment
Design and engineering
Estimation and quantity surveying
Procurement and imports
Planning and project management
Quality control and document control
The works are monitored with daily supervision, inspection requests and weekly progress reports with photographs and cost status. After handover, defects-liability and corrective works are carried out by KRM’s own in-house maintenance team — not a subcontractor — with an optional annual maintenance contract. The same team handles a single room and a multi-building contract.
How the division worksQuestions answered
Frequently asked questions
Can you renovate hotel rooms while the hotel is operating?
Yes. We release floors in sequence, hoard the work zone, control noise and dust, and schedule noisy works in agreed windows so the hotel keeps selling the rest of its rooms. A mock-up room is approved before the first floor starts.
Do you supply the furniture as well as the fit-out?
Yes. Casegoods such as headboards, wardrobes and vanities are made in our own joinery workshop; loose furniture and lighting can be imported European pieces procured by our procurement department. Everything is delivered and installed by the same team.
Which hotel areas can KRM fit out?
Guest rooms and suites, corridors, lobbies and lounges, restaurants, cafés and bars, banquet halls, spas and gyms, and back-of-house areas such as kitchens, laundries and staff facilities.
Who handles the MEP works in a hotel renovation?
KRM’s own MEP department: fan-coil units and extract, lighting and controls, bathroom plumbing, and the fire-alarm, emergency-lighting and sprinkler interfaces with the hotel’s existing systems.
Request a proposal
Have a facility to build, fit out, furnish or maintain?
Send us the drawings, a scope or just an idea. The CEO and the department head review every enquiry personally and reply within one working day with a clear proposal, programme and price.
Last updated