Department · Mechanical, electrical and plumbing
MEP engineering that performs under test
Our MEP department designs, installs, tests and commissions the mechanical, electrical and plumbing systems behind every KRM project — from a pressure-cascaded clean room to a government hall's HVAC and fire systems.
The short answer
In short
KRM's MEP department designs, installs, tests and commissions HVAC, electrical, plumbing, fire and ELV systems in-house. For clinical facilities that includes HEPA filtration, pressure cascades, medical gas, IPS / UPS and RO water loops. Every system is tested in front of the client and recorded in the handover dossier.
- Disciplines
- HVAC, electrical, ELV, plumbing, fire, medical gas
- Clinical references
- ISO 14644 · HTM · ASHRAE guidance
- Tested before handover
- Pressure, flood, air-balancing, HEPA, electrical
- After handover
- Planned maintenance under an AMC
In-house MEP
Designed, installed and commissioned by the same engineers
Mechanical and electrical engineers, MEP site engineers and our own MEP crew sit inside KRM, so coordination with civil works, joinery and medical equipment happens on one drawing and one programme.
In clinical areas the department delivers HVAC with HEPA filtration, pressure cascades and air-change rates to ISO 14644 and HTM / ASHRAE guidance; dedicated air-handling units with VFD control and BMS alarms; medical gas, IPS / UPS and isolated power; and RO water loops for dialysis. In commercial and government buildings the same team delivers HVAC, lighting and power, plumbing, fire alarm and fire-fighting, and ELV systems.
Every system is tested in front of the client — pressure tests, flood tests, air-balancing, HEPA integrity and electrical certificates — and recorded in the handover dossier.
- HVAC · HEPA · pressure control
- Electrical · IPS / UPS · ELV
- Fire · plumbing · medical gas
Scope of works
MEP scope of works
Mechanical
- HVAC design, ducting, AHUs, FCUs and VRF systems
- HEPA terminal filters, pressure cascades and air-change control
- Laminar-flow ceilings for operating theatres
- Medical gas pipelines, outlets and alarms
- Plumbing, drainage and hot-water systems
- RO water plant rooms and loop piping for dialysis
- Fire-fighting: sprinklers, hose reels, pumps and clean-agent systems
Electrical and ELV
- LV distribution, panels, cabling and lighting
- Isolated power supplies (IPS) and UPS for critical areas
- Earthing, lightning protection and emergency power
- Fire alarm, voice evacuation and emergency lighting
- Nurse call, access control, CCTV, data and BMS
- Testing, commissioning and authority certificates
How we work
Hold points, witness points and certificates
- 01
Coordinated drawings
Above-ceiling services are coordinated on shop drawings and inspected jointly before any ceiling closes.
- 02
Tested before handover
Pressure tests, 24-hour flood tests, air-balancing, HEPA integrity and electrical test certificates on every project.
- 03
Witnessed by the client
Fire alarm and sprinkler tests are witnessed by the client's FLS team; ELV integration by the client's IT.
- 04
Critical-area power
IPS, UPS and emergency power designed to HTM and DoH requirements for theatres, ICUs and laboratories.
- 05
Clean-room air
Pressure cascades, air-change rates and filtration to ISO 14644, validated with a certified report.
- 06
Maintenance after handover
Planned maintenance, filter changes and re-validation under an AMC by the engineers who installed the systems.
Delivered by KRM
MEP inside clinical environments
Ceiling services · clean room 
Laminar flow · operating theatre 
Process gas systems
Questions answered
Frequently asked questions
Do you design the MEP as well as install it?
Yes. Our in-house engineers produce the design, load calculations, authority submissions and shop drawings, then the same department installs and commissions the systems.
Can you provide medical gas and isolated power?
Yes — medical gas pipelines, outlets and alarms, IPS and UPS for operating theatres, ICUs and laboratories are part of the department's standard clinical scope, tested and certified at handover.
Which tests do you carry out on MEP systems?
Pressure tests, 24-hour flood tests, air-balancing, HEPA integrity tests and electrical test certificates, with fire alarm and sprinkler tests witnessed by the client's FLS team. All results go into the handover dossier.
Request a proposal
Have a facility to build, fit out or maintain?
Send us the drawings, a scope or just an idea. The CEO and the department head review every enquiry personally and reply within one working day with a clear proposal, programme and price.
Last updated